All information contained here and on subsequent pages are subject to the myFordFocus.com Terms of Use Policy, which basically states that myFordFocus.com IS NOT responsible for anything you do to your car... Please read it! :)

Intermittent Wiper Mod

Since Ford decided the ZX3 didn't need variable speed windshield wipers, we ZX3 owners have no choice but to order the 6 speed wiper switch and swap out the stock unit for the good one. Simple enough, takes about 3 minute, maybe 5...
Additional How-To Resource: Click here
Tools required: Flathead screwdriver, 10mm socket or wrench.
Time to complete: 5 minutes
Cost: Approx. $30(cost of part) Available at myFordPerformance.com

Instructions:

• Using the 10mm socket, disconnect your car's battery terminals to prevent any electrical shock worries...
• Using the flathead screwdriver, press the small tab on left and right side of the steering column cover, to release the cover and expose the stock wiper switch.
• Press and release the small tab that secures the stock wiper switch.
• Pull out the stock wiper switch, and disconnect the electrical connector.
  • There is a small tab / clip on top of the connector, release it first.
• Connect the new replacement wiper switch to the electrical connector.
• Install the new replacement wiper switch to the steering column where the stock switch was removed.
• Replace the steering column cover, snapping the cover back in place.
• Reconnect the car battery.
• Enjoy your new variable speed intermittent wiper switch. :)