myFordFocus.com
myFordFocus.com HomemyFordFocus.com Yahoo ChatClassifiedsContact UsFrequently Asked QuestionsHow-To LibraryMessage Boards2002 SVT
Store FrontOwner's GuidePhoto GalleryZX3Racing.com

myFordFocus.com How-To Do-It-Yourself Instructions
(Based on 2000-2004 Zetec & SPI Model Focus')

All information contained here and on subsequent pages are subject to the myFordFocus.com Terms of Use Policy, which basically states that myFordFocus.com IS NOT responsible for anything you do to your car... Please read it! :)



Starter Motor - 2.0L Zetec-E

Removal

  • Disconnect the battery ground cable.
  • Disconnect the mass air flow (MAF) sensor electrical connector.
  • Disconnect the breather pipe (air cleaner outlet tube removed for clarity).
  • Disconnect the air cleaner outlet tube from the throttle body and remove the air cleaner.
  • Remove the starter motor upper bolts.
  • Raise and support the vehicle. For additional information, refer to Section 100-02 .
  • Disconnect the starter motor electrical connector.
  • Remove the starter motor.

Installation

To install, reverse the removal procedure.


Copyright 2001 MyFordFocus.com
Terms of Use